Description
HZT's SFP-GE-T s a small, hot-swappable RJ45 electrical port module, compliant with Gigabit Ethernet standards and SFP Multi-Source Agreement (MSA) standards,supporting 10M/100M/ 1000M transmission rate. CAT5 class network cable transmission distance of up to 100 meters, good electromagnetic compatibility, compatible with various brands of hosts, widely used in data centers and enterprise networks. Access to the PHY chip registers is via the I2C interface. Meet the certification requirements such as RoHS. There are 3 modes to choose from, AUTO mode supports 1000BASE-X auto-negotiation, FULL mode supports the LINK status via the RX_LOS pin, SGMII mode supports hosts with SGMII functionality.
Feature
Bidirectional data transfer capability up to 1.25Gb/s
Technical Parameter
Parameter | Symbol | Min | Typ | Max | Unit | Remark |
Bit Error Rate | BER |
|
|
10-12 |
|
|
Data rate | DR | 10 |
|
1000 | Mb/s | 1 |
Operating Temperature | TC | 0 |
|
70 |
℃ |
|
Cable length |
|
|
|
100 | M | 3 |
Storage Temperature | TSTO | -40 |
|
85 |
℃ |
2 |
Supply Current | Icc |
|
320 | 375 | mA |
|
Input Voltage | VCC | 3.14 | 3.3 | 3.46 | V |
|
Maximum Voltage | VMAX | -0.5 |
|
4 | V |
|
1. IEEE802.3ae
2.Ambient temperature
3. CAT 5 UTP
Dimension
Ordering Information
Part number | Description |
SFP-GE-T-AUTO-D1 |
1000BASE-T SFP Copper RJ-45
Connector 100m Auto Negotiation
default mode |
SFP-GE-T-FULL-D1 |
1000BASE-T SFP Copper RJ-45
Connector 100m not support Auto
Negotiation default mode |