Description
EFP to fiber for Panasonic RCU includes a Camera Optic Adaptor and aOptic Base Station. The system transports 1 ch 3G/HD-SDI signal from the camerato the Base Station, 1 ch Reverse 3G/HD-SDI, Genlock or BB/TC, Remote controlfor Panasonic camera(Panasonic’s 10 pin interface, base can be connectedPanasonic RCU AJ-RC10G、ECUAG-EC4G),, intercom (Camera end can be connected professional 4-pin or 5-pinXLR headset, OB end can be connected intercom main station), tally(One color ortwo colors can be selected), Remote camera power supply (14.6V DC up to 100Watts). The system puts all of the signals needed for multi-camera 3G/HD-SDIproduction on a SMPTE hybrid cable, insuring robust, trouble-free connectivityon any studio or remote production.
Features
1. 1ch forwardand 1ch reverse SDI
2. Handle allPathological patterns
3. Automaticcable equalization to ensure signal integrity
4. 3G/HD/SD-SDIinput auto recognition, support 270Mbit/s - 2.97Gbit/s according to SMPTE 424M,SMPTE 292M and SMPTE 259M
5. Mic inputswith mute and pre-amps
6. Headphonewith volume up or down
7. Remotecontrol (Sony/ Panasonic/JVC/Ikegami/ Datavideooptional)
8. Tally LED+/-wet output or dry Contact Closure optional
9. V-mount orA-mount (Anton/Bauer)battery plate optional
10. Genlock or TC/BB is available
11. Reverse PGM/IFB audio optional
12. 10/100M Ethernet is optional
13. Remote camera power supply (14.6V DC up to100 Watts), with insertion detection protection, Lemo SMPTE 304 or NeutrikOpticalCON DUO connector
14. SMPTE hybrid cable 200+m
Specifications:
General index
|
Work Temp |
-25°C to 55°C |
|
Storage Temp |
-40°C to 85°C |
|
humidity |
0 ~ 95% (non-condensing) |
|
Camera Optic Adaptor |
|
|
Input power |
DC 11~19V |
|
Power consumption |
<12W |
|
Net weight |
1kg |
|
Appearance size |
188mm*116mm*45mm (without V-mount / A-mount) |
|
Optic Base Station |
|
|
Input power |
AC90~240V |
|
Power consumption |
<12W |
|
Net weight |
3kg |
|
Appearance size |
19” 1U standard rack mount |
Optical：
|
Wavelength |
1310nm / 1550nm / CWDM |
|
Output Power |
-6~-1dBm |
|
Rx sensitivity |
<-18dBm |
|
Transmission Distance |
Remote power 100W，SMPTE hybrid cable 200+m |
|
Optical connector |
Lemo SMPTE 304 / Neutrik OpticalCON DUO Camera end can be rotated 90 degrees |
SDI input/output:
|
Signal format |
SMPTE 424M, SMPTE 292M, SMPTE 259M |
|
Data rate |
270Mbit/s - 1.48Gbit/s - 3Gbit/s |
|
Cable Equalization |
Automatic cable EQ (Belden 1694A cable) 250m @ 270Mbit/s, 140m @ 1.5Gbit/s, 80m @ 3Gbit/s |
|
SDI interface |
BNC 75 Ohm |
Genlock / TC / BB
|
Number of Channels |
1 |
|
Input/output impedance |
BNC 75Ω (unbalance) |
|
Input/output voltage |
1.0Vp-p |
|
Differential Gain |
< ±1.5% |
|
Differential Phase |
< ±1% |
|
SNR |
>60dB |
Intercom:
|
Camera Optic Adaptor |
|
|
Interface |
4pin XLR(Male) /5pin XLR(Female)/ 3.5mm headset jack |
|
Microphone |
Mic inputs with mute and pre-amps |
|
Headphone |
with volume up or down |
|
Optic Base Station |
|
|
Interface |
3pin XLR Female/Male: Party line audio for Clearcom / Altairaudio / Granitesound’s Intercom main station ,or Line level balanced audio input and output DB9(Male): Line level unbalanced audio input and output, |
Tally:
|
Camera Optic Adaptor |
|
|
Interface |
4pin or 3pin mini XLR |
|
Output |
Dry Contact Closure or wet LED+/- |
|
On: short or LED on Off: open or LED off |
|
|
Optic Base Station |
|
|
Interface |
DB9(Male) |
|
Input |
Dry Contact Closure or TTL |
|
On: short to GND or TTL low Off: open or TTL high |
|
Remote：
|
Camera Optic Adaptor |
|
|
Interface |
Panasonic’s 10 pin interface |
|
Data |
RS422 /RS232/RS485 |
|
Optic Base Station |
|
|
Interface |
Panasonic’s 10 pin interface |
|
Data |
RS422 /RS232/RS485 |
PGM:
|
Camera Optic Adaptor |
|
|
Interface |
4pin XLR(Male) /5pin XLR(Female)/ 3.5mm headset jack |
|
Headphone |
with volume up or down |
|
Optic Base Station |
|
|
Interface |
3pin XLR Female: Line level balanced audio input |
Ethernet：
|
Work mode |
Full duplex/half duplex |
|
Data Rate |
10/100Mbps(AUTO) |
|
connection terminal |
RJ45 |
Can be customized.
