Description
EFP to fiber for Panasonic camera includes a Camera Optic Adaptor anda Optic Base Station. The system transports 1 ch 3G/HD-SDI signal from the Panasonic AG-HPX370 or AG-HPX500 seriescamera to the Base Station, 1 ch Reverse 3G/HD-SDI, Genlock or BB/TC,Remote control for Panasonic camera(Panasonic’s 10 pin interface, base can be connectedPanasonic RCU AJ-RC10G、ECU AG-EC4G),, intercom (Camera endcan be connected professional 4-pin or 5-pin XLR headset, OB end can beconnected intercom main station), tally(One color or two colors can beselected). The system puts all of the signals needed for multi-camera 3G/HD-SDIproduction on a fiber cable, insuring robust, trouble-free connectivity on anystudio or remote production.
Features
1. 1 chforward and 1 ch reverse SDI
2. Handleall Pathological patterns
3. Automaticcable equalization to ensure signal integrity
4. 3G/HD/SD-SDIinput auto recognition, support 270Mbit/s - 2.97Gbit/s according to SMPTE 424M,SMPTE 292M and SMPTE 259M
5. Micinputs with mute and pre-amps
6. Headphonewith volume up or down
7. Remotecontrol (Sony/ Panasonic/JVC/Ikegami/ Datavideo optional)
8. TallyLED+/- wet output or dry Contact Closure optional
9. V-mountor A-mount (Anton/Bauer)battery plate optional
10. Genlock or TC/BB is available
11. Reverse PGM / IFB audio is optional
12. 10/100M Ethernet is optional
13. Remote camera power supply (14.6V DC up to100 Watts), with insertion detection protection, Lemo SMPTE 304 or NeutrikOpticalCON DUO connector
14. SMPTE hybrid cable 200+m
Specifications:
Generalindex
Work Temp |
-25°C to 55°C |
Storage Temp |
-40°C to 85°C |
humidity |
0 ~ 95% (non-condensing) |
Camera Optic Adaptor |
|
Input power |
DC11~19V |
Power consumption |
<12W |
Net weight |
1kg |
Appearance size |
188mm*116mm*45mm (without V-mount / A-mount) |
Optic Base Station |
|
Input power |
AC90~240V |
Power consumption |
<12W |
Net weight |
3kg |
Appearance size |
19” 1U standard rack mount |
Optical:
Wavelength |
1310nm / 1550nm / CWDM |
Output Power |
-6~-1dBm |
Rx sensitivity |
<-18dBm |
Transmission Distance |
Remote power 100W,SMPTE hybrid cable 200+m |
Optical connector |
Lemo SMPTE 304 / Neutrik OpticalCON DUO Camera end can be rotated 90 degrees |
SDIinput/output:
Signal format |
SMPTE 424M, SMPTE 292M, SMPTE 259M |
Data rate |
270Mbit/s - 1.48Gbit/s - 3Gbit/s |
Cable Equalization |
Automatic cable EQ (Belden 1694A cable) 250m@270Mbit/s, 140m @ 1.5Gbit/s, 80m @ 3Gbit/s |
SDI interface |
BNC 75 Ohm |
Genlock /TC /BB
Number of Channels |
1 |
Input/output impedance |
BNC 75Ω (unbalance) |
Input/output voltage |
1.0Vp-p |
Differential Gain |
< ±1.5% |
Differential Phase |
< ±1% |
SNR |
>60dB |
Intercom:
Camera Optic Adaptor |
|
Interface |
4pin XLR(Male) /5pin XLR(Female)/ 3.5mm headset jack |
Microphone |
Mic inputs with mute and pre-amps |
Headphone |
with volume up or down |
Optic Base Station |
|
Interface |
3pin XLR Female/Male: Party line audio for Clearcom / Altair audio/Granite sound’s Intercom main station ,or Line level balanced audio input and output DB9(Male): Line level unbalanced audio input and output, |
Tally:
Camera Optic Adaptor |
|
Interface |
4pin or 3pin mini XLR |
Output |
Dry Contact Closure or wet LED+/- |
On: short or LED on Off: open or LED off |
|
Optic Base Station |
|
Interface |
DB9(Male) |
Input |
Dry Contact Closure or TTL |
On: short to GND or TTL low Off: open or TTL high |
Remote:
Camera Optic Adaptor |
|
Interface |
Panasonic’s 10 pin interface |
Data |
RS422/RS232/RS485 |
Optic Base Station |
|
Interface |
Panasonic’s 10 pin interface |
Data |
RS422/RS232/RS485 |
PGM:
Camera Optic Adaptor |
|
Interface |
4pin XLR(Male) /5pin XLR(Female)/ 3.5mm headset jack |
Headphone |
with volume up or down |
Optic Base Station |
|
Interface |
3pin XLR Female: Line level balanced audio input |
Ethernet:
Work mode |
Full duplex/half duplex |
Data Rate |
10/100 Mbps(AUTO) |
connection terminal |
RJ45 |
Can be customized.