- EFP to Fiber for Panasonic ROP and Datavideo Intercom
- 【Brief】:
- 【Series】:Camera EFP fiber transceiver
EFP to Fiber for Panasonic ROP and Datavideo Intercom includes a Camera Optic Adaptor and a Optic Base Station. The system transports a 3G/HD-SDI signal from the Panasonic camera to the Base Station, Reverse video(SDI or CVBS),Ethernet for Remote Operation Panel (ROP, Such as Panasonic AK-HRP200), Datavideo intercom (Camera end be connected Datavideo HP1 Single-Ear Headset, OB end be connected Datavideo ITC-100 Talkback System), tally(2 colors, Camera end be connected Datavideo ext tally lamp TD3, OB end be connected Datavideo ITC-100 Talkback System),reverse CVBS or Genlock is optional. The system puts all of the signals needed for multi-camera 3G/HD-SDI production on a SM / MM tactical or SMPTE hybrid fiber cable, insuring robust, trouble-free connectivity on any studio or remote production.
Features
- Handle all Pathological patterns
- Automatic cable equalization to ensure signal integrity
- 3G/HD/SD-SDI input auto recognition, support 270Mbit/s - 2.97Gbit/s according to SMPTE 424M, SMPTE 292M and SMPTE 259M
- 10+Km on single mode fiber or 300m on multimode fiber transmission
- With amplifier for mic and phones
- Remote control with ROP ,Such as Panasonic AK-HRP200
- Intercom and Tally with Datavideo ITC-100 Talkback System
- V-mount or A-mount battery plate optional
Specifications:
Work Temp |
-25°C to 55°C |
Storage Temp |
-40°C to 85°C |
humidity |
0 ~ 95% (non-condensing) |
Camera Optic Adaptor |
|
Input power |
DC 11~19V |
Power consumption |
<8W |
Net weight |
1kg |
Appearance size |
188mm*116mm*45mm(without V-mount / A-mount) |
Optic Base Station |
|
Input power |
AC90~240V |
Power consumption |
<20W |
Net weight |
3kg |
Appearance size |
19” 1U standard rack mount |
Optical:
Wavelength |
1310nm / 1550nm / CWDM |
Output Power |
-6~-1dBm |
Rx sensitivity |
<-18dBm |
Transmission Distance |
SM fiber 10+km , MM fiber 300m |
Optical connector |
Dul LC /FC/ST/SC/ Lemo / Neutrik (optional) |
SDI input/output:
Signal format |
SMPTE 424M, SMPTE 292M, SMPTE 259M |
Data rate |
270Mbit/s - 1.48Gbit/s - 3Gbit/s |
Cable Equalization |
Automatic cable EQ (Belden 1694A cable) 250m @ 270Mbit/s, 140m @ 1.5Gbit/s, 80m @ 3Gbit/s |
SDI interface |
BNC 75 Ohm |
Intercom:
Camera Optic Adaptor |
|
Interface |
3.5mm headset jack, Datavideo Headset |
Microphone |
Mic inputs with mute and pre-amps |
Headphone |
With amplifier and volume up or down |
Optic Base Station |
|
Interface |
5pin XLR Male, be connected Datavideo Talkback System |
Tally:
Camera Optic Adaptor |
|
Interface |
3.5mm headset jack, be connected Datavideo ext tally lamp |
Output |
Green/Red 2 colors |
On: LED on Off: LED off |
|
Optic Base Station |
|
Interface |
5pin XLR Male |
Input |
be connected Datavideo Talkback System |
Remote(Ethernet):
Work mode |
Full duplex/half duplex |
Data Rate |
10/100Mbps(AUTO) |
connection terminal |
RJ45 |
Panel diagram: