EFP to Fiber for Panasonic AG-HPX370 includes a Camera Optic Adaptor and a Optic Base Station.. The system transports a 3G/HD-SDI signal from the Panasonic AG-HPX370 or AG-HPX500 series camera to the Base Station, Reverse video(SDI or CVBS), Remote control data(Panasonic’s 10 pin interface, Connect Panasonic RCU AJ-RC10G、ECU AG-EC4G), Intercom (Camera end can be connected professional 4-pin or 5-pin XLR headset, OB end can be connected Clearcom or RTS , etc intercom main station), Tally(1 or 2 colors is optional). Genlock signal, blackburst/trilevel sync or Time code is optional. The system puts all of the signals needed for multi-camera 3G/HD-SDI production on a SM / MM tactical or SMPTE hybrid fiber cable, insuring robust, trouble-free connectivity on any studio or remote production.
Features
- Handle all Pathological patterns
- Automatic cable equalization to ensure signal integrity
- 3G/HD/SD-SDI input auto recognition, support 270Mbit/s - 2.97Gbit/s according to SMPTE 424M, SMPTE 292M and SMPTE 259M
- 10+Km on single mode fiber or 300m on multimode fiber transmission
- Mic inputs with mute and pre-amps ,with amplifier for phones
- Remote control for SONY’s or Panasonic’s camera
- V-mount or A-mount battery plate is optional
Specifications:
General index
|
Work Temp |
-25°C to 55°C |
|
Storage Temp |
-40°C to 85°C |
|
humidity |
0 ~ 95% (non-condensing) |
|
Camera Optic Adaptor |
|
|
Input power |
DC 11~19V |
|
Power consumption |
<8W |
|
Net weight |
1kg |
|
Appearance size |
188mm*116mm*45mm(without V-mount / A-mount) |
|
Optic Base Station |
|
|
Input power |
AC90~240V |
|
Power consumption |
<20W |
|
Net weight |
3kg |
|
Appearance size |
19” 1U standard rack mount |
Optical：
|
Wavelength |
1310nm / 1550nm / CWDM |
|
Output Power |
-6~-1dBm |
|
Rx sensitivity |
<-18dBm |
|
Transmission Distance |
SM fiber 10+km , MM fiber 300m |
|
Optical connector |
Dul LC /FC/ST/SC/ Lemo 3K.93C/ Neutrik OpticalCON DUO |
SDI input/output:
|
Signal format |
SMPTE 424M, SMPTE 292M, SMPTE 259M |
|
Data rate |
270Mbit/s - 1.48Gbit/s - 3Gbit/s |
|
Cable Equalization |
Automatic cable EQ (Belden 1694A cable) 250m @ 270Mbit/s, 140m @ 1.5Gbit/s, 80m @ 3Gbit/s |
|
SDI interface |
BNC 75 Ohm |
Intercom:
|
Camera Optic Adaptor |
|
|
Interface |
4pin XLR(Male) /5pin XLR(Female) |
|
Microphone |
Mic inputs with mute and pre-amps |
|
Headphone |
With amplifier and volume up or down |
|
Optic Base Station |
|
|
Interface |
3pin XLR Female/Male: Party line audio for Clearcom or RTS Intercom main station DB9(Male): Line level audio input and output |
Tally:
|
Camera Optic Adaptor |
|
|
Interface |
4pin air head or 3pin mini XLR |
|
Output |
Dry Contact Closure or wet LED+/- |
|
On: short or LED on Off: open or LED off |
|
|
Optic Base Station |
|
|
Interface |
DB9(Male) |
|
Input |
Dry Contact Closure or TTL On: short to GND or TTL low Off: open or TTL high |
Remote：
|
Camera Optic Adaptor |
|
|
Interface |
SONY’s 8 pin or Panasonic’s 10 pin interface |
|
Data |
RS422 /RS232/RS485 |
|
Optic Base Station |
|
|
Interface |
SONY’s 8 pin or Panasonic’s 10 pin interface |
|
Data |
RS422 /RS232/RS485 |
Panel diagram：
