- 2-Port 10/100/1000Base-Tx to fiber Industrial POE Switch
- 【Brief】：Gigabit 2-port Industrial Switch
- 【Series】：Industrial Ethernet Switch
Description
-2x10/100/1000Base-TX RJ45 ports, 1x1000Base-FX Fast SFP ports
-Support Auto-MDIX, and full/half duplex self-negotiation mode
-Provide SC/FC/ST/LC interface fiber port, support single/dual fiber transmission
-Support 10K bytes giant frame, compatible with various extension protocol
-8K MAC address table
-Support IEEE802.3az energy efficient Ethernet technology
-Support IPv6 Protocol
-Electric 4KV surge protection, easy to use in outdoor environment
-Complete status indicator, working state at a glance
-Power input polarity protection design, no worry about wrong operation
-Metal case, no fan design
-Installation method: DIN-rail /Wall mounting
| Physical Port | |
| Copper Ports | 2 10/100/1000Base-T RJ45 auto MDI-MDI-X |
| Fiber Ports | 1 1000Base-SX/LX/BX SFP interfaces |
| Parameters | |
| Ethernet standards |
IEEE802.3 IEEE802.3u IEEE802.3z IEEE802.3ab IEEE802.3x IEEE802.3az IEEE802.3ah IEEE802.1X IEEE802.1Q |
| Bandwidth | 12.0Gbps |
| Buffer Memory | 2M bits on-chip buffer memory |
| Jumbo Frame | Up to10k Bytes |
| MAC address table | 8K entries |
| ESD Protection | 6KV |
| Transmission mode | Store and Forward(full/half duplex mode) |
| LED Indicator | |
| Power | Connect-always |
| RJ45 |
Link/Act: connect-always; data exchange-blink Speed light: 100Mbps-always; 10Mbps-blink |
| Fiber | Link/Act: connect-always; data exchange-blink |
| Power Information | |
| Power access mode | Phoenix terminal Block |
| Redundant power input | 9-56VDC |
| Overload protection | Yes |
| Power reverse | Support |
| Power consumption | Full-load<10W |
| Power over Ethernet (For item with POE Function) | |
| PoE Standard | IEEE 802.3at Power over Ethernet Plus/PSE |
| PoE Power Supply Type | End-span |
| Power Pin Assignment | 1/2 (+), 3/6 (-) |
| PoE Power Output |
Per port 54V DC Max. 30 watts |
| PoE Power Budget (max.) | 60W maximum |
| Number of PoE Ports | 2 |
| Physical Property | |
| Protection grade | IP40 aluminum case |
| Cooling mode | Natural cooling, no fan design |
| Dimensions | 130mm x 94mm x 35mm (L x W x H) |
| Installation mode | DIN-rail / wall-mountable |
| Weight | 500g |
| Working Environment | |
| Operating Temperature | -40℃~75℃ |
| Operating Humidity | 5%~90% non-condensing |
| Storage | -40℃~85℃ |
| Warranty | |
| MTBF | 50,000 hours |
| Defects Liability Period | 3 year warranty, lifetime technical support |
| Certification Standard | |
| EMI | FCC Part15 Subpart B Class A,EN 55022 Class A |
| EMS |
EN61000-4-2(ESD), EN61000-4-3(RS), EN61000-4-4(EFT), EN61000-4-5(Surge), EN61000-4-6(CS), EN61000-4-8, EN61000-4-11 |
| Shock | IEC60068-2-27 |
| Free Fall | IEC60068-2-32 |
| Vibration | IEC60068-2-6 |
| Safety grade | EN60950-1 |
Ordering information
|
HZT-FI4102-1S |
Industrial Switch with 2*10/100/1000Base-Tx Ports and 1*1000Base-Fx SFP slot |
|
HZT-FI4102-1S-2P |
POE Industrial Switch with 2*10/100/1000Base-Tx Ports and 1*1000Base-Fx SFP slot (2*POE+) |
|
HZT-FI4102-1F |
Industrial Switch with 2*10/100/1000Base-Tx Ports and 1*1000Base-Fx SM SC 20KM Port |
|
HZT-FI4102-1F-2P |
POE Industrial Switch with 2*10/100/1000Base-Tx Ports and 1*1000Base-Fx SM SC 20KM Port (2*POE+) |
|
HZT-FI4202-1S |
Industrial Switch with 2*10/100/1000Base-Tx Ports and 2*1000Base-Fx SFP slot |
|
HZT-FI4202-1S-2P |
POE Industrial Switch with 2*10/100/1000Base-Tx Ports and 2*1000Base-Fx SFP slot (2*POE+) |
|
HZT-FI4202-1F |
Industrial Switch with 2*10/100/1000Base-Tx Ports and 2*1000Base-Fx SM SC 20KM Port |
|
HZT-FI4202-1F-2P |
POE Industrial Switch with 2*10/100/1000Base-Tx Ports and 2*1000Base-Fx SM SC 20KM Port (2*POE+) |
