- 24*10/100/1000M PoE ports and 2*100/1000M SFP L2+ managed PoE switch
- 【Brief】：L2+ managed PoE fiber switch with 24*10/100/1000M PoE ports and 2*100/1000M SFP ports. Port 1-24 can support IEEE802.3af/at PoE standard. Built-in power supply.
- 【Series】：POE Switch
Description
The HZT-POE800020 is a gigabit L2+ managed PoE fiber switch independently developed by ONV. It has 24*10/100/1000Base-T RJ45 ports and 2*100/1000Base-X SFP fiber ports. Port 1-24 can support IEEE802.3af/at PoE standard. Single-port PoE power reaches 30W. As a PoE power supply device, it can automatically detect and recognize the power receiving equipment that meets the standard and supply power through the network cable. It can supply power to POE terminal equipment such as wireless AP, webcam, VoIP phone, building visual access control intercom through the network cable, to meet the network environment that needs high-density PoE power supply, suitable for hotels, campuses, parks, supermarkets, scenic spots, factory quarters and SMB small and medium-sized enterprises form a cost-effective network.
The HZT-POE800020 has L2+ full network management, supports IPV4/IPV6 management, static route full line-rate forwarding, security protection mechanism, complete ACL/QoS policy, and rich VLAN functions, and is easy to manage and maintain. Supports multiple network redundancy protocols STP/RSTP/MSTP (<50ms) and (ITU-T G.8032) ERPS(<20ms) to improve link backup and network reliability. When a one-way network fails, communication can be quickly restored to ensure important Uninterrupted communication for applications. According to the actual application requirements, you can configure multiple application services such as PoE power management, port traffic control, VLAN division, and SNMP through the Web network management mode.
Feature
Gigabit access, Gigabit SFP fiber port uplink
◇ Support non-blocking wire-speed forwarding.
◇ Support full-duplex based on IEEE802.3x and half-duplex based on Backpressure.
◇ Support Gigabit Ethernet port and Gigabit SFP port combination, which enables users to flexibly build networking to meet the needs of various scenarios.
Intelligent PoE power supply
◇ IEEE 802.3af/at PoE standard, without damaging non-PoE devices.
◇ PoE network management, realize PoE port power allocation, priority setting, port power status viewing, time scheduling, etc.
◇ Priority system for PoE port, it will supply power to the high priority level port first when the power budget is insufficient and avoid overwork of the device.
◇ 24*10/100/1000Base-T RJ45 ports, meeting the needs of security monitoring, teleconferencing system, wireless coverage, and other scenarios.
Strong business processing capability
◇ ERPS/STP/RSTP/MSTP.
◇ Static and dynamic aggregation.
◇ IGMP V1/V2 and IGMP Snooping.
◇ IEEE802.1Q VLAN, flexible VLAN division,Voice VLAN and QinQ configuration.
◇ QoS, Priority mode based on 802.1P, Port & DSCP, queue scheduling algorithm including Equ, SP, WRR & SP+WRR.
◇ ALC, filter data packet through configuring matching rules, processing operation & time permission, and provide flexible and safe access control.
Security
◇ 802.1X authentication.
◇ Port isolation,Storm control.
◇ IP-MAC-VLAN-Port binding.
Stable and reliable
◇ CCC,CE, FCC, RoHS.
◇ Low power consumption, galvanized steel casing. The Fan active cooling.
◇ The user-friendly panel can show the device status through the LED indicator of PWR, Link, PoE.
◇ Self-developed power supply, high redundancy design, providing a long term and stable PoE power output.
Easy operation and maintenance management
◇ HTTPS, SSLV3, and SSHV1/V2.
◇ RMON, system log, LLDP, and port traffic statistics.
◇ CPU monitoring, memory monitoring, Ping test, and cable diagnose.
◇ Web management, CLI command line (Console, Telnet), SNMP (V1/V2/V3).
Specification
| Model | HZT-POE800020 | |
| Interface Characteristics | ||
| Fixed Port | 1*RS232 console port(115200,N,8,1) | |
| 2*100/1000Base-X uplink SFP ports (Data) | ||
| 24*10/100/1000Base-T PoE ports (Data/Power) | ||
| Ethernet Port | 10/100/1000Base-T(X) auto-sensing,Full/half duplex MDI/MDI-X self-adaption | |
| Twisted Pair Transmission | 10BASE-T: Cat3,4,5 UTP(≤100 meter) | |
| 100BASE-TX: Cat5 or later UTP(≤100 meter) | ||
| 1000BASE-T: Cat5e or later UTP(≤100 meter) | ||
| SFP Slot Port | Gigabit SFP optical fiber interface, default no include optical modules (optional order single-mode / multi-mode, single fiber / dual fiber optical module. LC) | |
| Optical Cable/ Distance | Multi-mode: 850nm /0-550M, Single-mode: 1310nm /0-40KM, 1550nm/ 0-120KM. | |
| Chip Parameter | ||
| Network Management Type | L2+ | |
| Network Protocol | IEEE802.3 10BASE-T, IEEE802.3i 10Base-T, IEEE802.3u 100Base-TX | |
| IEEE802.3ab 1000Base-T, IEEE802.3z 1000Base-X, IEEE802.3x | ||
| Forwarding Mode | Store and Forward(Full Wire Speed) | |
| Switching Capacity | 256Gbps | |
| Forwarding | 38.69Mpps | |
| Rate@64byte | ||
| CPU | 500MHz | |
| DRAM | 1G | |
| FLASH | 128M | |
| MAC | 8K | |
| Buffer Memory | 8M | |
| Jumbo Frame | 9.6K | |
| LED Indicator | Power: PWR(Yellow), System: SYS(Yellow), Network: Link(Yellow), POE: PoE (Green), Fiber port: L/A(Green) | |
| Reset Switch | Yes, press and hold the switch for 10 seconds and release it to restore the factory settings | |
| PoE & Power Supply | ||
| PoE Port | Port 1 to 24, IEEE802.3af/at | |
| PoE Management | PoE working status | |
| Delay start of power supply | ||
| PoE output priority configuration | ||
| Scheduling of PoE operation and time | ||
| Total power limit of PoE power supply | ||
| PoE output power allocation, off/on&af/at | ||
| Power Supply Pin | Default 1/2 (+) 3/6 (-) | |
| Max Power Per Port | 30W, IEEE802.3af/at | |
| Total PWR / Input Voltage | 400W (AC100-240V) | |
| Power Consumption | Standby:<18W, Full load:<380W | |
| Power Supply | Built-in power supply, AC 100~240V 50-60Hz 5.0A | |
| Physical Parameter | ||
| Operation TEMP / Humidity | -20~+55°C, 5%~90% RH Non condensing | |
| Storage TEMP / Humidity | -40~+75°C, 5%~95% RH Non condensing | |
| Dimension (L*W*H) | 440*290*44.5mm | |
| Net /Gross Weight | <4.4kg / <5.0kg | |
| Installation | Desktop, 19 inch 1U cabinet | |
| Certification & Warranty | ||
| Lightning Protection | Lightning protection: 4KV 8/20us, Protection level: IP30 | |
| Certification | CCC, CE mark, commercial, CE/LVD EN62368-1, FCC Part 15 Class B, RoHS | |
| Warranty | 3 years, lifelong maintenance. | |
| Network Management Features | ||
| Interface | IEEE802.3X (Full-duplex) | |
| Port temperature protection setting | ||
| Port green Ethernet Energy-saving setting | ||
| Broadcast storm control based on port speed | ||
| The speed limit of the message flow in the access port. The minimum particle size is 64Kbps. | ||
| Layer 3 Features | IPV4/IPV6 static route/default route supports up to 128 entries | |
| L2+ network management, ARP protocol, maximum 1024 entries | ||
| Layer 3 routing and forwarding, support communication between different network segments and different VLANs | ||
| VLAN | Voice VLAN, QinQ configuration, IEEE802.1q | |
| VLAN based on MAC, VLAN based on the protocol | ||
| 4K VLAN based on port, Port configuration of Access, Trunk, Hybrid. | ||
| Port Aggregation | LACP, Static aggregation | |
| Max 13 aggregation groups and 8 ports per group. | ||
| Spanning Tree | STP (IEEE802.1d), RSTP (IEEE802.1w), MSTP (IEEE802.1s) | |
| Industrial Ring Network Protocol | G.8032 (ERPS), Recovery time less than 20ms | |
| 250Ring at most, Max 250 devices per ring. | ||
| Multicast | MLD Snooping v1/v2, Multicast VLAN | |
| IGMP Snooping v1/v2, Max 1024 multicast groups, Fast log out | ||
| Port Mirroring | Bidirectional data mirroring based on port | |
| QoS | Diff-Serv QoS, Priority Mark/Remark | |
| Queue Scheduling Algorithm (SP, WRR, SP+WRR) | ||
| Flow-based Rate Limiting, Flow-based Packet Filtering | ||
| 8*Output queues of each port, 802.1p/DSCP priority mapping | ||
| ACL | Port-based Issuing ACL,ACL based on port and VLAN | |
| L2 to L4 packet filtering, matching first 80 bytes message. Provide ACL based on MAC, Destination MAC address, IP Source, Destination IP, IP Protocol Type, TCP/UDP Port, TCP/UDP Port Range, and VLAN, etc. | ||
| Security | IP-MAC-VLAN-Port binding | |
| ARP inspection,Anti-DoS attack | ||
| AAA & RADIUS,MAC learning limit | ||
| Mac black holes,IP source protection | ||
| IEEE802.1X & MAC address authentication | ||
| Broadcast storm control,Backup for host datum | ||
| SSH 2.0,SSL,Port isolation,ARP message speed limit | ||
| User hierarchical management and password protection | ||
| DHCP | DHCP Client, DHCP Snooping, DHCP Server, DHCP Relay | |
| Management | CPU instant utilization status view | |
| Console/AUX Modem/Telnet/SSH2.0 CLI | ||
| One-key recovery, Cable Diagnose, LLDP | ||
| Web Management (HTTPS), NTP, System work log, Ping Test | ||
| ONV NMS- Smart Network Management System Platform (LLDP+SNMP) | ||
| Download & Management on FTP, TFTP, Xmodem SFTP, SNMP V1/V2C/V3 | ||
| System | Category 5 Ethernet network cable | |
| Web browser: Mozilla Firefox 2.5 or higher, Google browser chrome V42 or higher, Microsoft Internet Explorer10 or later; | ||
| TCP/IP, network adapter, and network operating system (such as Microsoft Windows, Linux, or Mac OS X) installed on each computer in a network | ||
