ProductsCurrent Location :Home > Products > POE Switch
8* 10/100/1000M RJ45 ports and 8*100/1000M SFP fiber slot L2+ managed PoE switch
【Brief】:L2+ managed PoE fiber switch with 8* 10/100/1000M RJ45 ports and 8*100/1000M SFP fiber slot ports, Port 1-8 can support IEEE802.3af/at PoE standard, Built-in 130W power supply. Support 1U/19 inch rack installation.
【Series】:POE Switch

Description 


The HZT-POE80011  is a full gigabit managed PoE fiber switch independently developed by HZT. It has 8*10/100/1000Base-T RJ45 ports and 8*100/1000Base-X SFP fiber slot ports . Port 1-8 can support IEEE 802.3af/at standard PoE power supply. single port PoE power reaches 30W, and the maximum PoE output power is 130W (at-250W). As a PoE power supply device, it can automatically detect and recognize the power receiving equipment that meets the standard and supply power through the network cable. It can supply power to POE terminal equipment such as wireless AP, webcam, VoIP phone, building visual access control intercom, etc. through a network cable to meet the network environment that needs high-density PoE power supply. It is suitable for hotels, campuses, parks, shopping malls, scenic spots, hospitals,, factory dormitory and small and medium-sized enterprise.


The HZT-POE80011 has L2+ full network management function, supports IPV4/IPV6 management, static route full line rate forwarding, complete security protection mechanism, complete ACL/QoS policy and rich VLAN functions, and is easy to manage and maintain. Supports multiple network redundancy protocols STP/RSTP/MSTP (<50ms) and (ITU-T G.8032) ERPS to improve link backup and network reliability. When one-way network fails, communication can be quickly restored to ensure important Uninterrupted communication for applications. According to the actual application requirements, you can configure multiple application services such as PoE power management, port traffic control, VLAN division, and SNMP through the Web network management mode.

Feature



Gigabit access, gigabit SFP port uplink

◇ All series supports "10/100/1000M RJ45 port + Gigabit SFP port " combination, which enables users to flexibly build networking to meet the needs of various scenarios.

◇ Support non-blocking wire-speed forwarding.

◇ Support full-duplex based on IEEE802.3x and half-duplex based on backpressure.



Intelligent PoE power supply

◇ 8*10/100/1000Base-T RJ45 ports, meeting the needs of security monitoring, teleconferencing system, wireless coverage, and other scenarios.

◇ IEEE 802.3af/at PoE standard, without damaging non-PoE devices.

◇ Priority system for PoE port, it will supply power to the high priority level port first when the power budget is insufficient and avoid overwork of the device.

◇ PoE network management, realize PoE port power allocation, priority setting, port power status viewing, time scheduling, etc.


Strong business processing capability

◇ IEEE802.1Q VLAN, flexible VLAN division,Voice VLAN and QinQ configuration.

◇ QoS, Priority mode based on 802.1P, Port & DSCP, queue scheduling algorithm including Equ, SP, WRR & SP+WRR.

◇ ALC, filter data packet through configuring matching rules, processing operation & time permission, and provide flexible and safe access control.

◇ IGMP V1/V2 and IGMP Snooping.

◇ ERPS/STP/RSTP/MSTP.

◇ Static and dynamic aggregation.

 

Security

◇ 802.1X authentication.

◇ Port isolation,Storm control.

◇ IP-MAC-VLAN-Port binding.


Stable and reliable

◇ Low power consumption, galvanized steel casing, The Fan active cooling.

◇ Self-developed power supply, high redundancy design, providing a long term and stable PoE power output.

◇ CCC,CE, FCC, RoHS.

◇ The user-friendly panel, it can show the device status through the LED indicator of PWR, Link ,PoE.


Easy operation and maintenance management

◇ Web management, CLI command line (Console, Telnet), SNMP (V1/V2/V3).

◇ HTTPS, SSLV3, and SSHV1/V2.

◇ RMON, system log, LLDP, and port traffic statistics.

◇ CPU monitoring, memory monitoring, Ping test, and cable diagnose.

Specification 

Model HZT-POE80011
Interface Characteristics
Fixed Port 8*10/100/1000Base-T PoE ports (Data/Power)
8*100/1000Base-X uplink SFP slot ports(Data)
1 * RS232 console port(115200,N,8,1)
Ethernet Port 10/100/1000Base-T(X),Auto-sensing,Full/half duplex MDI/MDI-X self-adaption
Twisted Pair Transmission 10BASE-T: Cat3,4,5 UTP(≤100 meter)
100BASE-TX: Cat5 or later UTP(≤100 meter)
1000BASE-T: Cat5e or later UTP(≤100 meter)
SFP Slot Port Gigabit SFP optical fiber interface, default matching optical modules (optional order single-mode / multi-mode, single fiber / dual fiber optical module. LC)
Optical Cable Multi mode: 850nm 0 ~ 500M,single mode: 1310nm 0 ~ 40KM, 1550nm 0 ~ 120KM.
Chip Parameter
Network Management Type L2+
Network Protocol IEEE802.3 10BASE-T; IEEE802.3i 10Base-T;
IEEE802.3u 100Base-TX; IEEE802.3ab 1000Base-T
IEEE802.3z 1000Base-X
IEEE802.3x
Forwarding Mode Store and Forward(Full Wire Speed)
Switching Capacity 256Gbps (Non-blocking)
Forwarding 23.81Mpps
Rate@64byte
MAC 8K
Buffer Memory 6M
Jumbo Frame 9.6K
LED Indicator System: SYS (green), network ;Link (yellow), POE: PoE (green), Fiber port: L/A(green)
Reset Switch Yes, One-button factory reset
PoE & Power
PoE Port Port 1 to 8 IEEE802.3af/at @ POE
PoE Management Total power limit of PoE power supply
PoE output power allocation, off& af &at
PoE output priority configuration
PoE working status
Delay start of power supply
Scheduling of PoE operation and time
Power Supply Pin Default 1/2 (+), 3/6 (-)
Max Power Per Port 30W; IEEE802.3af/at
Total PWR / Input Voltage 130W/ (AC100-240V)
Power Consumption Standby<15W, Full Load<120W
Power Supply Built in power supply
AC100~240V 50-60Hz 2.3A
Physical Parameter
Operation TEMP / Humidity -20~+55°C;5%~90% RH Non condensing
Storage TEMP / Humidity -40~+75°C;5%~95% RH Non condensing
Dimension (L*W*H) 270.5*181*44.5mm
Net /Gross Weight <1.7kg / <2.2kg
Installation Desktop, 19 inch 1U cabinet
Certification & Warranty
Lightning protection / protection level Lightning protection: 4KV 8/20us; Protection level: IP30
Certification CCC;CE mark, commercial; CE/LVD EN60950;FCC Part 15 Class B; RoHS
Warranty 3 years, lifelong maintenance.
Network Management Features
Interface IEEE802.3X (Full-duplex)
Port temperature protection setting
Port green Ethernet Energy-saving setting
Broadcast storm control based on port speed
The speed limit of the message flow in the access port.
The minimum particle size is 64Kbps.
Layer 3 Features L2+ network management ,IPV4/IPV6 management
L3 soft routing forwarding,
Static route, Default route @ 128 pcs, APR @ 1024 pcs
VLAN 4K VLAN based on port, IEEE802.1q
VLAN based on the protocol
VLAN based on MAC
Voice VLAN, QinQ configuration
Port configuration of Access, Trunk, Hybrid
Port Aggregation LACP, Static aggregation
Max 8 aggregation groups and 8 ports per group.
Spanning Tree STP (IEEE802.1d),RSTP (IEEE802.1w),MSTP (IEEE802.1s)
Industrial Ring Network Protocol G.8032 (ERPS),Recovery time less than 20ms
250 Ring at most, Max 1024 devices per ring.
Multicast MLD Snooping v1/v2,Multicast VLAN
IGMP Snooping v1/v2, Max 1024 multicast groups, Fast log out
Port Mirroring Bidirectional data mirroring based on port
QoS Flow-based Rate Limiting
Flow-based Packet Filtering
8*Output queues of each port
802.1p/DSCP priority mapping
Diff-Serv QoS,Priority Mark/Remark
Queue Scheduling Algorithm (SP, WRR, SP+WRR)
ACL Port-based Issuing ACL,ACL based on port and VLAN
L2 to L4 packet filtering, matching first 80 bytes message. Provide ACL based on MAC, Destination MAC address, IP Source, Destination IP, IP Protocol Type, TCP/UDP Port, TCP/UDP Port Range, and VLAN, etc.
Security IP-MAC-VLAN-Port binding
ARP inspection,Anti-DoS attack
AAA & RADIUS,MAC learning limit
Mac black holes,IP source protection
IEEE802.1X & MAC address authentication
Broadcast storm control,Backup for host datum
SSH 2.0,SSL,Port isolation,ARP message speed limit
User hierarchical management and password protection
DHCP DHCP Client,DHCP Snooping, DHCP Server,DHCP Relay
Management One-key recovery
Cable Diagnose,LLDP
Web Management (HTTPS)
NTP,System work log,Ping Test
CPU instant utilization status view
Console/AUX Modem/Telnet/SSH2.0 CLI
Download & Management on FTP, TFTP, Xmodem, SFTP,SNMP V1/V2C/V3
HZT NMS - smart network management system platform(LLDP+SNMP)
System Category 5 Ethernet network cable
Web browser: Mozilla Firefox 2.5 or higher, Google browser chrome V42 or higher, Microsoft Internet Explorer10 or later;
TCP/IP, network adapter, and network operating system (such as Microsoft Windows, Linux, or Mac OS X) installed on each computer in a network


Related Products
Pre:8*10/100/1000M RJ45 ports and 2*100/1000M SFP fiber ports L2+ managed PoE switch
Next:9*10/100/1000M RJ45 ports and 1*1000M uplink SFP fiber slot port POE Switch
Support
Payment Methods
Shipping&Delivery
Return Policy
Warranty
About Us
Company Profile
Company Culture
Certifications
Products
Fiber Optical Cable
Fiber Optic Patch Cord
HD video fiber converter
Fiber optic accessories
SFP Fiber Module
Contact Us
Tel: +86 134 28747163
E-mail: Sales@hzt-techs.com
Follow Us