Description
EFP to fiber for Sony camera includes a Camera Optic Adaptor anda Optic Base Station. The system transports 1ch 3G/HD-SDI signal from thecamera to the Base Station, 1ch reverse 3G/HD-SDI, Genlock or BB/TC, Remotecontrol for Sony or Panasonic camera(compatible with thecamera control unit RM-B150, RM-B170 or RM-B750, italso can use in Panasonic camera and RCU via RemoteControl Cable for Sony to Panasonic),intercom (Camera end can be connected professional 4-pin or 5-pin XLR headset,OB end can be connected intercom main station), tally(One color or two colorscan be selected), 1ch reverse PGM/IFB audio ,Remote camera power supply (14.6VDC up to 100 Watts). The system puts all of the signals needed for multi-camera3G/HD-SDI production on a SMPTE hybrid cable, insuring robust, trouble-freeconnectivity on any studio or remote production.
Features
1. 1 ch forward and 1 ch reverse SDI
2. Handle all Pathological patterns
3. Automatic cable equalization to ensuresignal integrity
4. 3G/HD/SD SDI input auto recognition,support 270Mbit/s - 2.97Gbit/s according to SMPTE 424M, SMPTE 292M and SMPTE259M
5. Mic inputs with mute and pre-amps
6. Headphone with volume up or down
7. Remote control (Sony/ Panasonic/JVC/Ikegami/ Datavideo optional)
8. Tally LED+/- wet output or dry ContactClosure optional
9. V-mount or A-mount (Anton/Bauer)batteryplate optional
10. Genlock or TC/BB is available
11. Reverse PGM/IFB audio optional
12. Remote camera power supply (14.6V DC up to100 Watts), with insertion detection protection, Lemo SMPTE 304 or NeutrikOpticalCON DUO connector
13. SMPTE hybrid cable 200+m
Specifications:
Generalindex
|
Work Temp |
-25°C to 55°C |
|
Storage Temp |
-40°C to 85°C |
|
humidity |
0 ~ 95% (non-condensing) |
|
Camera Optic Adaptor |
|
|
Input power |
DC 11~19V |
|
Power consumption |
<12W |
|
Net weight |
1kg |
|
Appearance size |
188mm*116mm*45mm (without V-mount / A-mount) |
|
Optic Base Station |
|
|
Input power |
AC90~240V |
|
Power consumption |
<12W |
|
Net weight |
3kg |
|
Appearance size |
19” 1U standard rack mount |
Optical：
|
Wavelength |
1310nm / 1550nm / CWDM |
|
Output Power |
-6~-1dBm |
|
Rx sensitivity |
<-18dBm |
|
Transmission Distance |
Remote power 100W，SMPTE hybrid cable 200+m |
|
Optical connector |
Lemo SMPTE 304 / Neutrik OpticalCON DUO Camera end can be rotated 90 degrees |
SDIinput/output:
|
Signal format |
SMPTE 424M, SMPTE 292M, SMPTE 259M |
|
Data rate |
270Mbit/s - 1.48Gbit/s - 3Gbit/s |
|
Cable Equalization |
Automatic cable EQ (Belden 1694A cable) 250m @ 270Mbit/s, 140m @ 1.5Gbit/s, 80m @ 3Gbit/s |
|
SDI interface |
BNC 75 Ohm |
Genlock /TC / BB
|
Number of Channels |
1 |
|
Input/output impedance |
BNC 75Ω (unbalance) |
|
Input/output voltage |
1.0Vp-p |
|
Differential Gain |
< ±1.5% |
|
Differential Phase |
< ±1% |
|
SNR |
>60dB |
Intercom:
|
Camera Optic Adaptor |
|
|
Interface |
4pin XLR(Male) /5pin XLR(Female)/ 3.5mm headset jack |
|
Microphone |
Mic inputs with mute and pre-amps |
|
Headphone |
with volume up or down |
|
Optic Base Station |
|
|
Interface |
3pin XLR Female/Male: Party line audio for Clearcom / Altairaudio / Granitesound’s Intercom main station ,or Line level balanced audio input and output DB9(Male): Line level unbalanced audio input and output, |
Tally:
|
Camera Optic Adaptor |
|
|
Interface |
4pin or 3pin mini XLR |
|
Output |
Dry Contact Closure or wet LED+/- |
|
On: short or LED on Off: open or LED off |
|
|
Optic Base Station |
|
|
Interface |
DB9(Male) |
|
Input |
Dry Contact Closure or TTL |
|
On: short to GND or TTL low Off: open or TTL high |
|
Remote：
|
Camera Optic Adaptor |
|
|
Interface |
Sony’s 8 pin interface |
|
Data |
RS422 /RS232/RS485 |
|
Optic Base Station |
|
|
Interface |
Sony’s 8 pin interface |
|
Data |
RS422 /RS232/RS485 |
PGM:
|
Camera Optic Adaptor |
|
|
Interface |
4pin XLR(Male) /5pin XLR(Female)/ 3.5mm headset jack |
|
Headphone |
with volume up or down |
|
Optic Base Station |
|
|
Interface |
3pin XLR Female: Line level balanced audio input |
Can be customized.
