1. Product Overview
Most broadcast fiber multiplexers crowd signal ports on the rear panel and use generic IEC power cords, forcing technicians to squeeze wiring in tight rack depths, OB truck bays or temporary stage fly racks. This purpose-built fiber converter rethinks field wiring workflow: every video, audio and Ethernet interface is relocated to the front panel, while only the locking powerCON TRUE1 power inlet sits on the rear side.
It aggregates 8 channels of bidirectional 3G-SDI video, 2 channels of bidirectional professional XLR balanced analog audio, and 2 fully independent, isolated 10/100/1000M Gigabit Ethernet paths onto a duplex LC dual-fiber link. Using clean duplex fiber architecture instead of single-fiber WDM BiDi, it eliminates cross-wavelength crosstalk risk and delivers stable, low-jitter transmission critical for live broadcast, remote production, houses of worship and stadium AV systems.
No more reaching behind racks to patch SDI BNCs or XLRs. Technicians can complete signal patching, troubleshooting and cable swaps standing in front of the unit, cutting setup and fault-finding time dramatically. Rugged Neutrik powerCON TRUE1 locking mains power prevents accidental power dropouts during bumpy mobile production, a major upgrade from standard IEC C14 connectors.
2. Core Differentiated Highlights
✅ Front-Panel-First Signal Layout (Key Differentiator): ALL SDI, XLR Audio, RJ45 Ethernet and LC fiber connectors are mounted on the front panel. Rear panel ONLY houses the Neutrik powerCON TRUE1 power port. Rear side is clean, free of tangled signal cables; ideal for 1U rack, flight case, OB van and stage fly rigs. Patch, test and replace cables without pulling the unit out of the rack.
✅ Duplex LC Dual-Fiber Transport Architecture (Not single-fiber BiDi WDM) Two discrete optical fibers (Transmit fiber / Receive fiber) carry the full multiplex. Avoids wavelength drift, optical crosstalk and DDM module sensitivity issues common on single-fiber BiDi multiplexers. Easier inventory and fiber path commissioning for broadcast fiber crews.
✅ 8 Channels True Bidirectional 3G-SDI (SMPTE 425M, HD-SDI / SD-SDI backward compatible) Each of the 8 SDI paths works bidirectionally, supporting camera feeds, return program feeds, tally embedded video and intercom video feeds. Built-in SDI re-clocker and adaptive cable equalizer restore signal integrity before optical conversion.
✅ 2-Ch BiDi 3-Pin XLR Balanced Analog Audio, Broadcast-Grade Fully balanced, professional mic/line level XLR audio, bidirectional. Low noise floor, isolated audio ground design to break ground loops between stage, OB truck and control room. Suitable for program audio, IFB, intercom and announcer feeds.
✅ 2 Fully Independent Isolated 10/100/1000M Gigabit Ethernet Ports Two separate Ethernet domains, not switch ports. No broadcast storm cross-contamination between networks. Use one for PTZ camera control, one for NDI, tally, intercom or production IT. Electrical isolation protects AV network from ground potential differences over fiber links.
✅ Neutrik powerCON TRUE1 Locking AC Power (No IEC C14) Industrial locking mains connector with load-break capability. Prevents accidental disconnection when cables are pulled or the unit vibrates in mobile OB trucks, concert stages and temporary installations. Safe, standard connector for touring broadcast power distribution.
✅ Broadcast-optimized signal monitoring LED array on front panel Per-channel signal lock LED for each SDI, Audio Link, Ethernet Link/Activity, Optical Link, Power OK. All status visible at a glance from the front without rack rear inspection.
✅ Low-jitter, uncompressed native signal multiplexing Zero compression for SDI video and analog XLR audio; zero latency. Ideal for live sports, live entertainment, news remote production and critical low-latency broadcast workflows.
✅ 19-inch 1U rack-mount form factor, rugged metal chassis, wide operating temperature Ready for fixed studio racks and shock-resistant flight case integration.
3.Typical Application Scenarios
This duplex LC fiber multiplexer is engineered for live OB production trucks, broadcast studios, concert and festival stage rigging, stadium AV, house of worship, remote news production and corporate live events. The front-panel signal layout dramatically speeds up pre-show line checks and troubleshooting for rental and touring AV crews. The combination of locking TRUE1 power, balanced XLR audio, multiple bidirectional SDI return feeds and isolated gigabit Ethernet covers most modern live production signal requirements in one compact 1U fiber transport pair.