Description
ADSS cable is loose tube stranded. Fibers,  250μm , are positioned into a loose tube made of high modulus plastics.

The tubes are filled with a water-resistant filling compound. The tubes (and fillers) are stranded around a FRP (Fiber

Reinforced Plastic) as a non-metallic central strength member into a compact and circular cable core. After the cable

core is filled with filling compound. it is covered with thin PE (polyethylene) inner sheath. After stranded layer of aramid

yarns are applied over the inner sheath as strength member, the cable is completed with PE or AT (anti-tracking) outer

sheath.

Characteristics
●Can be installed without shutting off the power
●Excellent AT performance, The maximum inductive at the operating point of AT sheath can reach25kV

●Light weight and small diameter reducing the load caused by ice and wind and the load on towersand backprops
●Large span lengths and the largest span is over 1000m
●Good performance of tensile strength and temperature
●The design life span is 30 years     
Application
The actual status of overhead power lines is taken into full consideration when ADSS cable is being designed. For

overhead power lines under 110kV, PE outer sheath is applied. FOR power lines equal to or over 110kV, AT outer

sheath is applied. The dedicate design of aramid quantity and stranding process can satisfy the demand on various

spans.