ProductsCurrent Location :Home > Products > 1.25G SFP
1.25G Dual Fiber 1310nm 20KM SFP transceiver
【Brief】:
【Series】:1.25G SFP
  • Feature
  • Multi-sourced SFP package with dual LC/PC receptacles;
  • Single mode dual fibers transmission
  • Up to 20~80Km with 9/125μm SMF;
  • AC coupled for Rx and Tx side
  • Two temperature ranges: 0°C to +70°C for commercial level,
  • -40°C to +85°C for industrial level;
  • operates at data rate 1.25Gbps;
  • Complies with MIL-STD-883/GR-468
  • Complies with lots of brands of switch such as cisco h3c…….


Applications

Switch

Video monitor system Telecommunication system
Absolute Maximum Ratings

Parameter Symbol Min Max Unit
Storage Temperature TS -40 +85
 Operating Temperature  TOP Commercial level -20 +70  
industrial level -40 85
Supply Voltage VCC -0.5 +4.5 V
Voltage on Any Pin VIN 0 VCC V
Soldering Temperature ,Time -   260℃, 10 S ℃,S

 Recommended Operating Conditions

Parameter Symbol Min. Typ Max. Unit
 Ambient Temperature  TAMB Commercial level 0 - 70  
industrial level -40   85
Power Supply Voltage V CC-VEE 3 3.3 3.6 V

 Operating Conditions

1 TransmitterT=25, Vcc=3~3.6V (+3.3V)) 1.25G

Parameter Symbol Min. Typ Max. Unit
 Center Wavelength  lc  FP OR DFB 1520 1550 1580  nm
1280 1310 1340
CWDM l-6 l(note1) l+6
 Spectral width  △l FP@RMS - 1 2  nm
DFB@-20dBFWHM - - 1
Side Mode Suppression Ratio SMSR (DFB only) 30     dB
 Output Power 0~20km 1310 FP  Po -9 - -3  dBm
20km 1550 DFB -9 - -0

 

    CWDM  

-9

-

-0

 
 40km 1550 DFB

-5

 

0

CWDM

-5

 

0

 80km 1550 DFB

-3

  2
CWDM

-3

  2
Extinction Ratio ER 1.25G 9   -

dB

Supply Current ICCT -  

150

mA

Input Differential Impedance Rin   100  

Data Input Swing Differential Vin

300

 

1200

mV

Optical Modulation Amplitude OMA

174

   

μW

Transmit Disable Voltage VD

2.0

 

Vcc

V

Transmit Enable Voltage VEN 0  

0.8

V

Transmit Disable Assert Time      

10

us

Optical Rise/Fall Time Tr/ Tf (20-80%)   150

260

ps

Deterministic Jitter Contribution TX ΔDJ    

51.7

ps

Total Jitter Contribution TX ΔTJ    

90

ps

Output Optical Eye IUT-T G.957 Compliant

Note1: l:1270,1290,1310,1330,1350,1370,1390,1410,1430,1450,1470,1490,1510,1530,1550,1570,1590,1610.nm

2 Receiver   T=25, Vcc=3~3.6V (+3.3V) 1.25G

Parameter Symbol Min. Typ Max. Unit
 Wavelength Range  lc  1100    1610  nm
 Sensitivity 0~20km  1.25G Pin  PMIN - -24 -23     dBm
40km Pin - -25 -24
80km Pin - -27 -26
MAX. Input Power (Saturation) PMAX   -3 - -
Signal Detect Assert PA - - -24
Signal Detect De-assert PD -34 - -
Signal Detect Hysteresis PHYS 1 - 4
Supply Current ICCR - - 150 mA
Data Output Swing Differential Vout 400 - 1000 mV
Signal Detect Voltage – High VSDHC 2.0 - VCC  V
Signal Detect Voltage – Low VSDL 0 - 0.8

Notes:

switch from a high state to a low state.

1)Value of output power and sensitivity can be customized according to the demand

Ordering Information

Example

DSFP 49 24-C 1 2 LC - 80

Sign Mean Description
DSFP

Module type

DSFP= Dual fibers SFP SFP=Single fiber SFP
49

Center wave

30=1310tx/NO rx 50=1550tx/NO RX CWDM Like 49=1490 CWDM TX 1100~1610 RX
24 date Rate 03=155M 12=622M 24=1.25G 48=2.5G 60=3.125G
C Laser type F=FP D=DFB C=CWDM V=VCSEL
1

Operating T

1=-20~+70℃ 2=-40~+85℃  
1 DDMI 1=NO DDM 2=DDMI  
LC Connector SC=SC LC=LC  
 80  Distance 022=220M 055=550M 5=5KM 10=10KM
20=20KM 40=40KM 80=80KM 100=100KM

Example

DSFP 3X 24-0 12 LC - 80

Sign Mean Description
DSFP

Module type

DSFP= Dual fibers SFP SFP=Single fiber SFP
3X

Center wave

88=850NM T&R 3x=1310 tx/1100~1610 RX CWDM Like 49=1490 CWDM TX 1100~1610 RX
24 date Rate 03=155M 12=622M 24=1.25G

48=2.5G

60=3.125G
0 Laser type 0=no LD      
1

Operating T

1=-20~+70℃ 2=-40~+85℃  
2 DDMI 1=NO DDM 2=DDMI  
LC Connector SC=SC LC=LC  
 20  Distance 022=220M 055=550M

5=5KM

10=10KM
20=20KM 40=40KM

80=80KM

100=100KM

Typical products

 Part No.  Wavelength Con- nector  Temp. TXPower (dBm) RX Sens(Max.) (dBm) DD MI  Distance
DSFP3X24-F11LC-20 T 1310FP/rx 1100~1610

LC

-20 to 70 -9 to-0 -23 F 20km
DSFP5X24-D12LC-40 T 1550DFP /R 1100~1610

LC

-20 to 70 -5~0 -24 T 40KM
 DSFP6124-C12LC-80 T 1610 CWDM/ R1100~1610  

LC

 -20 to 70  -3 to 2  -26  T  80km

Designing notice

001

DSFP Pin description

Pin

Descriptions Pin Descriptions

1

VEET Transmitter Ground (Common with Receiver Ground) 1

2

TFAULT Transmitter Fault. 2

3

TDIS Transmitter Disable. Laser output disabled on high or open. 3

4

MOD_DEF(2) Module Definition 2. Data line for Serial ID. 4

5

MOD_DEF(1) Module Definition 1. Clock line for Serial ID. 4

6

MOD_DEF(0) Module Definition 0. Grounded within the module. 4

7

Rate Select No connection required  

8

LOS Loss of Signal indication. Logic 0 indicates normal operation. 5

9

VEER Receiver Ground (Common with Transmitter Ground) 1

10

VEER Receiver Ground (Common with Transmitter Ground) 1

11

VEER Receiver Ground (Common with Transmitter Ground) 1

12

RD- Receiver Inverted DATA out. AC Coupled  

13

RD+ Receiver Non-inverted DATA out. AC Coupled  

14

VEER Receiver Ground (Common with Transmitter Ground) 1

15

VCCR Receiver Power Supply  

16

VCCT Transmitter Power Supply  

17

VEET Transmitter Ground (Common with Receiver Ground) 1

18

TD+ Transmitter Non-Inverted DATA in. AC Coupled.  

19

TD- Transmitter Inverted DATA in. AC Coupled.  

20

VEET Transmitter Ground (Common with Receiver Ground) 1

Small Form-factor Pluggable (SFP) Transceiver MultiSource Agreement (MSA)

002




Related Products
Pre:1.25G BIDI 1310/1550nm 20KM SFP Transceiver
Next:SFP-10G-T
Support
Payment Methods
Shipping&Delivery
Return Policy
Warranty
About Us
Company Profile
Company Culture
Certifications
Products
Fiber Optical Cable
Fiber Optic Patch Cord
HD video fiber converter
Fiber optic accessories
SFP Fiber Module
Contact Us
Tel: +86 134 28747163
E-mail: Sales@hzt-techs.com
Follow Us